Oct 17, 2023

All about Ripplefold style curtains

curtain ripple fold heading custom handmade in grace white

WHAT IS RIPPLEFOLD STYLE DRAPERY?

Ripplefold drapery, a simple and elegant style, is highly sought after by interior designers and architects. They glide easily along the custom tracks. Ripple fold panels are always custom made to seamlessly cover the desired width. They are usually constructed with 1.7 - 2.2 times the fabric of the coverage width.

Our ripple fold style is made in 100% fullness by default. For other fullness options, please make the selection accordingly.

HOW TO MEASURE FOR RIPPLEFOLD CURTAINS?

For the width:

We have made the process simple. Measure the total width you would like to cover and fill in the width and length in our ripple fold custom page. When you are ordering, there is no need to add additional fabric to create fullness because our panels will have built-in fullness.

For the height:

If you are looking for the just-above-the-floor look (most popular), measure the distance from the ceiling to the floor then subtract 1.5" (1.0" for track clearance + 0.5" for floor clearance).

If you are looking for the puddling look, add 2”-6” to the ceiling/wall bracket to floor length.

A single layer ripplefold drape will take about 4.25" - 4.5" in depth depending on the fabric thickness. For a double layer ripplefold setup, the drapes will take up 8.5"-9" in depth.

WHAT TRACKS WORK WITH RIPPLEFOLD CURTAINS?

Our ripplefold curtains have a snap tape sewn on the top. You can purchase tracks along with the curtains directly on our custom Ripplefold page, select "Yes" under Include Track & Accessories. We offer the minimal, commercial-grade, powder-coated white aluminum track. For any questions, contact us at info@loftcurtains.com.

Track pieces between 92" and 104" will be charged an additional $150 for non-splice shipping. Track pieces between 104" to 240" will have the option to choose freight shipping for $1200 for non-splice shipping.
Freight shipping is highly recommended for an easy installation process and guaranteed smooth gliding. If freight shipping is not included, we will provide proper splice connectors. Your installer need to be very careful aligning the tracks using the connectors.
You only need to pay for freight shipping once if you have multiple sets. An adult needs to sign for freight shipping and to inspect for any serious damage of the packaging tube upon delivery.

HOW TO INSTALL RIPPLEFOLD CURTAINS? IS IT COMPLICATED？

ripple fold custom curtains grace white loft curtains

ripple fold loft curtains snap carrier custom order

ripple fold carrier install loft curtains custom made drapes

Simply snap the buttons onto the carriers and voila. The snaps and carriers are made for each other and they make solid bonds. Snapping and sliding the curtain panel onto the carriers takes time. Be patient with the installation process.

HOW TO INSTALL RIPPLEFOLD TRACKS?

For ceiling mount brackets

1. Measure Measure the width of the track and mark the two end brackets approximately 3”- 4” in from the ends of the track. Evenly space the remaining brackets and place corresponding marks.

2. Mount To attach the bracket to the ceiling; first, pre-drill holes for screw diameter when mounting into the wood frame of window or wall stud. Otherwise, pre-drill and install anchors first before fastening with screws.

3. Attach Bracket Place the track into the bracket as shown in the drawing; applying pressure until track “clicks” into the bracket. Make sure the track set screw is loose enough to allow the track retainer to flex. Repeat this step for the remaining brackets.

4. Tighten Tighten track set screws on all the brackets to secure track to brackets

ripple fold track installation

Installing Splice, if multiple pieces:

For wide areas, tracks will be shipped in multiple pieces and will require a splice.
• Slide the track of the connecting ends on each track into the channel of the splice and butt ends together.
• The tracks will snap together. Press together and confirm a tight fit.
• Secure with an additional screw.

ripple fold spice track install by loft curtains

For wall mount brackets

1. Measure Determine the height of the top of track and mark bracket height on the wall for all the brackets and adjust (as necessary) to make sure they are all leveled.

2. Mark Measure the width of the track and mark the two end brackets approximately 3"- 4" in from the ends of the track. Evenly space the remaining brackets and place corresponding marks.

3. Mount To attach the bracket to the wall; first, pre-drill holes for screw diameter when mounting into wood frame of window or wall stud. Otherwise, pre-drill and install anchors first before fastening with screws.

4. Attach Bracket Place the track into the bracket as shown in the drawing (updated version 3" heavy duty wall mount brackets) ; applying pressure until track “clicks” into the bracket. Make sure track set screw is loose enough to allow the track retainer to flex. Repeat this step for the remaining brackets.

wall mount bracket for ripplefold tracks loft curtains

(3" wall bracket with projection 2 1/2")

If double wall mount installation is requested, the 6" double wall mount brackets will be provided.

double wall mount brackets for ripplefold curtains

(6" double wall bracket with 1 1/2", 5 1/2" projection)